Skip to main content

LiveWebsite is live

Compliance

Run an ISO 9001 internal audit for concrete pour works

Productionv0.1.0New

Posted Jun 12, 2026

Automate ISO 9001 internal audits for concrete pours by retrieving records, generating ITPs, capturing non-conformances, and delivering board-ready reports.

Use this skillTalk to an expert

No credit card required

This skill orchestrates end-to-end ISO 9001 audits for concrete pour works. It pulls inspection records from SharePoint, drafts Inspection Test Plans, evaluates results against quality standards, flags non-conformances, and compiles executive-ready audit reports. Built for construction and infrastructure teams managing rigorous quality management system compliance.

Capabilities

What it does

7 actions, each one checked against your rules and recorded before it runs.

retrieve_inspection_records

Pull all inspection documents from SharePoint for the specified pour and date range.

draft_inspection_test_plan

Generate an ITP covering pre-pour, during-pour, and post-pour quality checkpoints.

evaluate_conformance

Compare test results against ISO 9001 quality thresholds and identify deviations.

generate_ncr_records

Create Non-Conformance Reports with severity, root cause, and corrective actions.

assign_ncr_owners

Designate responsible parties for each NCR based on inspection roles and accountability.

compile_audit_report

Produce a board-ready report with executive summary, findings, and evidence trails.

log_evidence_trail

Record all source documents, timestamps, and data lineage for 365-day retention.

Step by step

How it runs

Every run follows the same governed path, from request to recorded result.

  1. 1

    Authenticate to SharePoint and retrieve all inspection records for the specified pour identifier within the audit date range.

  2. 2

    Parse each document to extract test results, timestamps, inspector names, and recorded deviations.

  3. 3

    Generate an Inspection Test Plan covering formwork checks, rebar placement, slump tests, temperature monitoring, curing, and strength tests.

  4. 4

    Evaluate each inspection result against ISO 9001 quality thresholds and flag deviations as non-conformances.

  5. 5

    Draft NCR records with severity classification, root cause analysis, corrective actions, and assign responsible owners.

  6. 6

    Compile an executive summary, detailed findings, NCR attachments, and evidence references into a board-ready audit report.

  7. 7

    Log all data sources and inspection steps to the evidence trail for 365-day retention.

Oversight

Governance & audit

What gets captured and verified on every single run.

SharePoint Access

All inspection record retrieval is logged with timestamps and user identity. Access requires valid SharePoint credentials with read permissions scoped to the document library.

NCR Approval Workflow

Non-Conformance Reports are generated with designated responsible owners. Human review of NCRs is recommended before corrective action execution due to high risk tier.

PII and Confidentiality

Inspector names and responsible owners are captured from source records. Audit reports must comply with organizational data classification policies before board distribution.

Evidence Retention

All inspection documents, test results, and audit logs are retained for 365 days to meet ISO 9001 traceability and compliance requirements.

Pre-Output Review

High-risk audit reports should undergo human approval before finalization. Consider enabling pre_output approval workflow for board-ready deliverables.

In practice

Example in action

Quarterly Foundation Slab Audit for Infrastructure Project

  1. 1

    Retrieve Q1 Inspection Data. Connect to the project SharePoint site and pull all inspection records for slab pour batch FND-2024-Q1 from January 1 to March 31.

  2. 2

    Draft ITP and Evaluate Conformance. Generate an Inspection Test Plan covering formwork, rebar spacing, concrete slump, temperature monitoring, and 28-day strength tests. Compare retrieved test results against ITP requirements.

  3. 3

    Flag Non-Conformances. Identify three medium-severity NCRs: one formwork misalignment, one slump test deviation, and one delayed curing start. Classify severity and draft corrective actions.

  4. 4

    Assign Owners and Generate Report. Assign the formwork NCR to the site engineer, slump test NCR to the QA manager, and curing NCR to the concrete supplier. Compile findings into a board-ready audit report with executive summary showing 94% conformance rate across 47 inspections.

Under the hood

Skill manifest

The exact instructions this skill ships with, shown in full. Nothing hidden.

manifest.md
---
id: iso-9001-concrete-pour-audit
version: 0.1.0
display_name: Run an ISO 9001 internal audit for concrete pour works
pack: community
category: compliance
risk_tier: high
tags:
- ISO 9001
- audit
- concrete
- quality management
- non-conformance
- inspection
primary_domain: compliance
secondary_domains:
- operations
- engineering
capabilities:
- Retrieve inspection records from SharePoint
- Draft Inspection Test Plans
- Identify and capture non-conformances
- Generate NCR records
- Produce board-ready audit reports
- Execute ISO 9001 audit workflows
verticals:
- Construction
- Manufacturing
- Infrastructure
skill_type: composite
mechanisms:
- retrieval
- generation
- connector-based
- composite
- evaluation
standards:
- ISO 9001
- Quality Management Systems
input_schema:
  type: object
  required:
  - pour_identifier
  - sharepoint_site_url
  - audit_date_range
  properties:
    pour_identifier:
      type: string
      description: Unique identifier or batch number for the concrete pour work being
        audited.
    sharepoint_site_url:
      type: string
      description: Full URL to the SharePoint site or document library containing
        inspection records.
    audit_date_range:
      type: object
      description: Start and end dates for the audit period to scope record retrieval.
    include_draft_itp:
      type: boolean
      description: Whether to generate a new Inspection Test Plan as part of the audit
        report.
    ncr_severity_threshold:
      type: string
      description: Minimum severity level (low, medium, high, critical) for non-conformances
        to include in the report.
output_schema:
  type: object
  required:
  - audit_report_url
  - ncr_records
  - inspection_test_plan
  - summary
  properties:
    audit_report_url:
      type: string
      description: Downloadable link to the board-ready audit report PDF or document.
    ncr_records:
      type: array
      description: List of Non-Conformance Report records with severity, corrective
        actions, and responsible owners.
    inspection_test_plan:
      type: object
      description: Structured ITP covering pre-pour, during-pour, and post-pour quality
        checks.
    summary:
      type: object
      description: Executive summary with total inspections, conformance rate, and
        key findings.
    evidence_trail:
      type: array
      description: References to source documents and timestamps for audit traceability.
planner:
  mode: dynamic
  prompt_section: How to think about this task
  max_steps: 25
  max_duration_sec: 600
  max_cost_usd: 0.4
  model_tier: balanced
  allowed_step_kinds:
  - tool_call
  - llm_call
  - output
evidence:
  required_types:
  - log
  - audit
  capture_per_step: true
  retention_days: 365
routing:
  intent_examples:
  - Run an ISO 9001 audit for the slab pour last quarter
  - Check concrete pour compliance and generate NCRs
  - Pull inspection records from SharePoint and draft the ITP for audit
  - Produce a board-ready quality audit report for foundation works
  not_for:
  - Real-time concrete monitoring or sensor data analysis
  - Structural engineering calculations or load-bearing analysis
verifier_rules:
- All inspection records referenced in the audit report must exist in the evidence
  trail with valid SharePoint URLs.
- Every NCR record must include a severity level, description, corrective action,
  and designated responsible owner.
- The audit report must contain an executive summary with total inspections reviewed
  and conformance percentage.
---

## Overview
This skill automates ISO 9001 internal audits for concrete pour works. It retrieves inspection records from SharePoint, drafts Inspection Test Plans, identifies non-conformances against quality standards, generates NCR records, and compiles a board-ready audit report. Designed for construction, manufacturing, and infrastructure projects requiring rigorous quality management system compliance.

## How to think about this task
Start by authenticating to the SharePoint site and retrieving all inspection documents for the specified pour identifier within the audit date range. Parse each document to extract test results, timestamps, inspector names, and any recorded deviations.

Next, generate an Inspection Test Plan that covers the full concrete pour lifecycle: formwork checks, rebar placement verification, slump and temperature tests during pour, and post-pour curing and strength tests. Cross-reference the ITP requirements against the retrieved inspection data.

Evaluate each inspection result against ISO 9001 quality thresholds. Flag any deviations as non-conformances, classify their severity, and draft NCR records with root cause analysis and proposed corrective actions. Assign responsible owners for each NCR based on the inspection roles.

Finally, compile an executive summary, detailed findings, NCR attachments, and evidence references into a board-ready audit report. Ensure all data sources are logged for 365-day retention and that the report format meets ISO 9001 documentation standards.

## Capabilities
- Retrieve inspection records from SharePoint document libraries using site URL and pour identifier
- Draft Inspection Test Plans covering pre-pour, during-pour, and post-pour quality checks
- Identify and capture non-conformances by evaluating test results against ISO 9001 criteria
- Generate NCR records with severity classification, corrective actions, and responsible owners
- Produce board-ready audit reports with executive summary and evidence trails
- Execute ISO 9001 audit workflows with full logging and 365-day retention

## Inputs
**pour_identifier**: The unique batch or project code for the concrete pour being audited. This identifier is used to filter inspection records and link all findings to a specific work package.

**sharepoint_site_url**: The full URL to the SharePoint site or document library where inspection reports, test results, and quality records are stored. The skill authenticates and scopes retrieval to this location.

**audit_date_range**: An object containing start and end dates that define the audit period. Only inspection records within this range are retrieved and evaluated.

**include_draft_itp**: A boolean flag indicating whether to generate a new Inspection Test Plan as part of the audit deliverables. If false, the skill uses existing ITPs from SharePoint.

**ncr_severity_threshold**: Minimum severity level (low, medium, high, critical) for non-conformances to include in the final report. Lower-severity NCRs below this threshold are logged but excluded from the board report.

## Outputs
**audit_report_url**: A downloadable link to the board-ready audit report in PDF or document format. The report includes executive summary, detailed findings, NCR attachments, and evidence references.

**ncr_records**: An array of Non-Conformance Report records. Each NCR contains a severity level, description of the deviation, root cause analysis, corrective action plan, and designated responsible owner.

**inspection_test_plan**: A structured ITP object covering pre-pour checkpoints (formwork, rebar placement), during-pour tests (slump, temperature), and post-pour verifications (curing, strength tests).

**summary**: An executive summary object with total inspections reviewed, overall conformance rate percentage, key findings, and recommendations for process improvement.

**evidence_trail**: An array of references to source documents with SharePoint URLs, timestamps, and data lineage metadata. Supports full audit traceability and 365-day retention compliance.

## Tools
- **connectors**: SharePoint (document retrieval, authentication), PDF generation (audit report export)
- **operators**: text parsing (inspection record extraction), conformance evaluation (threshold comparison), NCR classification (severity assignment)
- **primitives**: data filtering (date range scoping), object mapping (ITP structure), array aggregation (NCR compilation)

## Guardrails
- All SharePoint access is authenticated and logged with user identity and timestamps. Read permissions must be scoped to the specified document library.
- Non-Conformance Reports are generated with designated responsible owners. Human review of NCRs is recommended before corrective action execution due to high risk tier.
- Inspector names and responsible owners are captured from source records. Audit reports must comply with organizational data classification policies before board distribution.
- All inspection documents, test results, and audit logs are retained for 365 days to meet ISO 9001 traceability and compliance requirements.
- High-risk audit reports should undergo human approval before finalization. Consider enabling pre_output approval workflow for board-ready deliverables.

## Examples
**Scenario**: Quarterly Foundation Slab Audit for Infrastructure Project

A project manager needs to conduct a Q1 ISO 9001 audit for foundation slab pour batch FND-2024-Q1 covering January 1 to March 31.

1. The skill connects to the project SharePoint site at `https://contoso.sharepoint.com/sites/InfraProject/InspectionRecords` and retrieves all documents tagged with pour identifier `FND-2024-Q1` within the date range.

2. It generates an Inspection Test Plan covering formwork alignment checks, rebar spacing verification, concrete slump tests, temperature monitoring during pour, and 28-day compressive strength tests. The skill cross-references 47 inspection records against ITP requirements.

3. Three deviations are identified: one formwork misalignment (medium severity), one slump test result outside tolerance (medium severity), and one delayed curing start (medium severity). The skill drafts NCR records with root cause analysis and corrective actions.

4. Responsible owners are assigned: formwork NCR to the site engineer, slump test NCR to the QA manager, and curing NCR to the concrete supplier. The skill compiles a board-ready audit report with an executive summary showing 94% conformance rate, detailed findings, and evidence trails. The report URL is returned for stakeholder distribution.
Feedback

Reviews

0.0(No ratings yet)

Reviews from teams using Run an ISO 9001 internal audit for concrete pour works.

No reviews yet

Be the first to share how Run an ISO 9001 internal audit for concrete pour works works for your team.

Discussion(0)

Sign in to join the discussion.Sign in
Failed to fetch

No comments yet. Be the first.